Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Bypass Feed Tray

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 45
4.5 Paper Feeding System
4.5.1 Bypass feed tray
4.5.2 Bypass feed unit
(1) Take off the duplexing unit front cover.
 P. 4-5"4.1.13 Duplexing unit front cover"
(2) Take off the duplexing unit rear cover.
 P. 4-5"4.1.14 Duplexing unit rear cover"
(3) Disconnect 1 connector and remove 1 screw.
Fig. 4-126
(4) Lift up the hinge slightly and then take off the
bypass tray.
Notes:
When installing or taking off the bypass tray,
keep it setting up because it is tensed with a
spring.
Fig. 4-127
(1) Take off the bypass feed tray.
 P. 4-45"4.5.1 Bypass feed tray"
(2) Open the duplexing unit.
(3) Remove 1 screw and take off the SFB lower
cover.
Notes:
When the optional LCF is installed, be sure
to install the cover with the duplexing unit
opened wider than the LCF.
Fig. 4-128
Connector
Bypass feed tray
SFB lower cover