Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Shutter Motor

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 41
4.4.4 Shutter
4.4.5 Shutter motor
(1) Remove the laser optical unit.
 P. 4-35"4.4.1 Laser optical unit"
(2) If the shutter is closed, rotate the shutter
motor section to open it.
A: Shutter closed
B: Shutter opened
Fig. 4-116
(3) Remove the shutter.
Fig. 4-117
(1) Remove the laser optical unit.
 P. 4-35"4.4.1 Laser optical unit"
Notes:
Make sure that the shutter is closed.
(2) Remove 2 screws and disconnect 1 connector.
(3) Take off the shutter motor.
Fig. 4-118
Shutter motor
Shutter
A
B
Shutter
Shutter motor