Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Media Sensor

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 66
4.5.31 Media sensor (S69)
(3) Remove 1 screw and then take off the 2nd
transfer side paper clinging detection sensor.
Fig. 4-190
Notes:
When installing the sensor holder, screw it in
while pressing it in the direction of the arrow.
Fig. 4-191
(1) Open the duplexing unit.
(2) Remove 1 screw and take off the SFB lower
cover.
Notes:
When the optional LCF is installed, be sure
to install the cover with the duplexing unit
opened wider than the LCF.
Fig. 4-192
2nd transfer side paper clinging detection sensor
Sensor holder
SFB lower cover