Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Read Motor

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 281
4.11.26 Read motor (MR2)
(3) Remove1 E-ring and 1 bushing.
Fig. 4-819
(4) Disconnect 1 connector.
(5) Remove 3 screws and take off the original
feed motor bracket with the motor.
Notes:
When installing the original feed motor
bracket, refix the loosened screw and tighten
the belt tension.
Fig. 4-820
(1) Take off the RADF rear cover.
 P. 4-258"4.11.3 RADF rear cover"
(2) Loosen 1 screw.
Fig. 4-821
Bushing E-ring
Connector