Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Tandem LCF Bottom Sensor; Standby Side Tray Paper Amount Detection Sensor

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 85
4.5.55 Tandem LCF bottom sensor (S107)
4.5.56 Standby side tray paper amount detection sensor (S106)
(1) Take off the tandem LCF feeding unit.
 P. 4-82"4.5.52 Tandem LCF feeding unit"
(2) Remove 6 screws, and then take off the
feeding side tray.
Fig. 4-247
(3) Disconnect 1 connector and release 3
latches. Then take off the tandem LCF
bottom sensor.
Fig. 4-248
(1) Take off the tandem LCF feeding unit.
 P. 4-82"4.5.52 Tandem LCF feeding unit"
(2) Remove 4 screws, and then take off the
plate.
Fig. 4-249
Feeding side tray
Tandem LCF bottom sensor
Plate