e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 86
(3) Remove 3 screws, and then take off the link
arm.
Fig. 4-250
(4) Remove 1 screw, and then take off the rear
fence.
Fig. 4-251
(5) Remove 2 screws, and then take off the
bracket.
Fig. 4-252
(6) Disconnect 1 connector and release 3
latches. Then take off the standby side tray
paper amount detection sensor.
Fig. 4-253
Standby side tray paper amount detection sensor
To Next Page
Loading...
