e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 36
3.3.4 Switches
3.3.5 Electromagnetic spring clutches
Symbol Name Function Remarks P-I
SWR1 Jam access cover opening/closing
switch
Switches between cutoff and supply
state of the 24 V power by opening/
closing of the jam access cover.
Fig. 3-3 81-1
SWR2 RADF opening/closing switch Detecting the opening/closing status of
the RADF
Switches between cutoff and supply
state of the 24 V power by opening/
closing of the RADF. (RADF open:
Shutdown)
Fig. 3-3 88-9
SW1 Main power switch Turning the main power of the
equipment ON/OFF
Fig. 3-17 44-41
SW2 Interlock switch Supplying or shutting down the AC
power to the switching regulator (Cover
interlock system voltage generation
circuit) by opening/closing the front
cover or duplexing unit
(Cover/unit open: Shutdown)
Fig. 3-16 44-10
SW3 Toner motor interlock switch Supplying or shutting down the power
to the toner motor by opening/closing
the front cover
(Cover open: Shutdown)
Fig. 3-17 44-14
SW4 Duplexing unit interlock switch Supplying or shutting down the IH
power by opening/closing the duplexing
unit
(Unit open: Shutdown)
Fig. 3-16 46-6
SW5 Reverse path cover switch Switching the opening/closing of the
reverse path cover
Fig. 3-6 37-13
SW7 Duplexing unit cover opening/closing
detection switch
Detecting the opening/closing status of
the cover of the automatic duplexing
unit
Fig. 3-16 18-40
SW8 Bridge unit connecting detection
switch
Detecting the connection of the bridge
unit
Fig. 3-17 44-13
SW9 Front cover opening/closing detection
switch
Detecting the opening/closing of the
front cover
Fig. 3-17 44-13
Symbol Name Function Remarks P-I
CLT1 Pressure roller contact/release clutch Driving the contacting/releasing
operation of the pressure roller
Fig. 3-7 39-7
CLT4 3rd drawer transport clutch Driving the transport roller of the 3rd
drawer or the tandem LCF
Fig. 3-19 9-42
CLT5 3rd drawer feed clutch Driving the separation roller, feed roller
and pickup roller of the 3rd drawer or
the tandem LCF
Fig. 3-19 9-42
CLT6 4th drawer transport clutch Driving the transport roller of the 4th
drawer
Fig. 3-19 9-42
CLT7 4th drawer feed clutch Driving the separation roller, feed roller
and pickup roller of the 4th drawer
Fig. 3-19 9-42
To Next Page
Loading...
