EasyManua.ls Logo

Toshiba e-STUDIO 6550Ce-STUDIO 5560C - TRU Waste Toner Box; TRU Waste Toner Amount Detection Sensor

Toshiba e-STUDIO 6550Ce-STUDIO 5560C
1499 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 159
4.7.19 TRU waste toner box
The replacement of TRU waste toner box is per 2PM. Ensure replacement is per 2PM.
4.7.20 TRU waste toner amount detection sensor (S17)
(1) Take off the duplexing unit rear cover.
P. 4-5"4.1.14 Duplexing unit rear cover"
(2) Take out the TRU waste toner box.
Notes:
When replacing the TRU waste toner box, if
the waste toner amount detection sensor is
dirty, clean it.
Fig. 4-465
(3) Seal the opening of the TRU waste toner
box.
Fig. 4-466
(1) Take off the TRU waste toner box.
P. 4-159"4.7.19 TRU waste toner box"
(2) Disconnect 1 connector and release 3
latches. Then take off the TRU waste toner
amount detection sensor.
Fig. 4-467
TRU waste toner box
Seal
TRU waste toner
amount detection sensor

Table of Contents

Related product manuals