Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Blade Side Seal

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 98
4.6.5 Blade side seal
(1) Take off the drum cleaning blade.
 P. 4-97"4.6.4 Drum cleaning blade"
(2) Take off the blade side seal.
Fig. 4-285
Notes:
When replacing the blade side seals, follow
the procedure below.
1. Move the blade to the front side and then
install it with 2 screws.
2. Install the 2 blade side seals following the
standard shown in the figure.
3. After the side seals are attached, move
the bracket retaining the blade and check
that it is neither caught nor comes up on
to the side seal.
Fig. 4-286
Fig. 4-287
Blade side seal
0~0.3 mm
0~0.3 mm
0 mm
0 mm
Side seal Side seal
Blade
Blade
Blade side seal
Drum cleaning blade