Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Drum Surface Potential Sensors Control PC Board; Auger Lock Detection Sensor

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 104
4.6.16 Drum surface potential sensors control PC board (V0S board) (e-
STUDIO6550C/6570C only)
4.6.17 Auger lock detection sensor (S42)
(1) Take off the EPU cover.
 P. 4-101"4.6.13 EPU cover"
(2) Disconnect 3 connectors.
Fig. 4-302
(3) Remove 2 screws and then take off the V0S
board.
Fig. 4-303
(1) Take off the EPU cover.
 P. 4-101"4.6.13 EPU cover"
(2) Rotate the auger to escape the actuator from
the sensor.
Fig. 4-304
Drum surface potential sensors
control PC board
Drum surface potential sensors control PC board
Actuator