Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Setting Range Correction; Adjustment of Smudged;Faint Text

6
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
6 - 39
6.2.8 Setting range correction
The values of the background peak in the range correction at the Black Mode can be switched to
“varied” or “fixed” in the following codes.
If they are fixed, the range correction is performed with standard values.
The values of the background peak affects the reproduction of the background density, and the values
of the text peak affects that of the text density.
<Adjustment Mode (05)>
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment.
<Procedure>
The procedure is the same as that of  P. 6-33"6.2.2 Density adjustment".
6.2.9 Adjustment of smudged/faint text
The smudge/faint text at a Black Mode can be set at the following codes.
<Adjustment Mode (05)>
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment.
Notes:
Remember the image specifications and life span of the replacing parts may not meet the
standard when the setting value is changed from the default value.
<Procedure>
The procedure is the same as that of  P. 6-33"6.2.2 Density adjustment".
Color
mode
Original mode
Item to be
adjusted
Remarks
Text/
Photo
Text
Printed
Image
Photo Map
Custo
m
mode
Gray
scale
Full
color
7767 7768 7769 7770 7771 7777 --- Automatic density
mode
0:Backgrou
nd peak/
fixed
1:Backgrou
nd peak/
varied
7772 7773 7774 7775 7776 7778 --- Manual density
mode
ACS
black
mode
7667 7668 --- --- --- --- --- Automatic density
mode
7669 7670 --- --- --- --- --- Manual density
mode
Black 7283 7284 --- --- --- 7236 7295 Automatic density
mode
7286 7287 --- --- --- 7237 7296 Manual density
mode
Color mode
Original mode
Item to be
adjusted
Remarks
Text/
Photo
Text
Custom
mode
Black 7097 7098 7252 Adjustment of
smudged/ faint text
When the value decreases, the faint text
is improved. When the value increases,
the smudged text is improved.
Acceptable values: 0 to 4
(Default: 2)
ACS
black
7102 7103 ---