Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Lamps, Coils, and Heaters; Thermistors, Thermopiles, and Thermostats

3
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
OUTLINE OF THE MACHINE
3 - 39
3.3.8 Lamps, coils, and heaters
3.3.9 Thermistors, thermopiles, and thermostats
Symbol Name Function Remarks P-I
EXP Exposure lamp Exposing originals Fig. 3-5 52-9
ERS-K Discharge LED-K Eliminating residual charge on the K
drum surface
Fig. 3-11 64-20
ERS-C Discharge LED-C Eliminating residual charge on the C
drum surface
Fig. 3-11 64-20
ERS-M Discharge LED-M Eliminating residual charge on the M
drum surface
Fig. 3-11 64-20
ERS-Y Discharge LED-Y Eliminating residual charge on the Y
drum surface
Fig. 3-11 64-20
LED Fuser unit jam releasing LED Illuminating the exit roller section of the
fuser unit for releasing paper jams
Fig. 3-16 44-55
LAMP Pressure roller heater lamp Heating of the pressure roller
• Center heater lamp
• Side heater lamp
• Sub heater lamp
(for e-STUDIO5540C/6540C/6550C
MJC, MJD)
Fig. 3-8 42-30
IH-COIL IH coil Heating of the fuser belt Fig. 3-8 43-13
DH1 Scanner damp heater (Left) Preventing condensation of the mirrors
of the carriage
Fig. 3-25 -
DH2 Scanner damp heater (Right) Preventing condensation of the lens Fig. 3-25 54-34
DH3 Drum damp heater Preventing condensation of the drum Fig. 3-25 5-20
Symbol Name Function Remarks P-I
THM1 Drum thermistor-K Detecting the surface temperature of
the drum for K
Fig. 3-10 59-27
THM2 Drum thermistor-Y Detecting the surface temperature of
the drum for Y
Fig. 3-10 59-27
THM3 Pressure roller center thermistor Detecting the surface temperature of
the center of the pressure roller
Fig. 3-7 42-15
THM4 Pressure roller side thermistor Detecting the surface temperature of
the side of the pressure roller
Fig. 3-7 42-15
THM5 Pressure roller edge thermistor Detecting the surface temperature of
the front edge of the pressure roller
Fig. 3-7 42-15
THM6 Fuser belt edge thermistor Detecting the surface temperature of
the front edge of the fuser belt
Fig. 3-7 40-23
THMP1 Fuser belt thermopile Detecting the surface temperature of
the fuser belt
Fig. 3-7 38-2
THMO1 Scanner damp heater thermostat Controlling the temperature of the
scanner damp heater
Fig. 3-25 -
THMO2 Pressure roller center thermostat Controlling the temperature of the
center of the pressure roller
Fig. 3-7 42-16
THMO3 Pressure roller side thermostat Controlling the temperature of the side
of the pressure roller
Fig. 3-7 42-17
THMO4 Fuser belt thermostat Controlling the temperature of the
Fuser belt
Fig. 3-7 43-42