EasyManua.ls Logo

Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Image Position Aligning Sensor (Rear); Image Quality Sensor

Toshiba e-STUDIO 6550Ce-STUDIO 5560C
1499 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 166
4.8.4 Image position aligning sensor (rear) (S22)
4.8.5 Image quality sensor (S23)
(1) Take off the image quality control unit
P. 4-165"4.8.1 Image quality control unit"
(2) Remove 2 screws and take off the image
position aligning sensor (rear).
Fig. 4-486
(1) Take off the image quality control unit
P. 4-165"4.8.1 Image quality control unit"
(2) Turn up a film [1] and then remove 2 screws.
Fig. 4-487
(3) Disconnect 1 connector, and take off the
image quality sensor
Fig. 4-488
Image position aligning sensor (rear)
[
1
]
Connector
Image quality sensor

Table of Contents

Related product manuals