Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Exit Guide; Exit;Reverse Guide; Reading End Guide

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 264
4.11.11 Exit guide / Exit/reverse guide / Reading end guide
(1) Take off the platen sheet unit.
 P. 4-261"4.11.8 Platen sheet unit"
(2) Remove the RADF exit tray.
 P. 4-262"4.11.9 RADF exit tray"
(3) Take off the original exit motor.
 P. 4-283"4.11.29 Original exit motor
(MR4)"
(4) Take off the original reverse motor.
 P. 4-283"4.11.28 Original reverse motor
(MR3)"
(5) Remove 1 clip, 1 pulley, 1 timing belt and 1
pin.
Fig. 4-768
(6) Disconnect 1 connector. Remove 1 clip and
take off the rear side guide bushing.
Fig. 4-769
(7) Remove 1 screw and take off the leaf spring.
Fig. 4-770
Timing belt
ClipPin
Pulley
ClipConnector
Guide bushing