1
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
FEATURE
1 - 1
1. FEATURE
1.1 Main Feature of e-STUDIO5540C/6540C/6550C
• The open platform interface using Web Service is embedded.
• The energy saving feature is included. The electrical power in the sleep mode is reduced to
5W (approx. 1/5)
• The image quality is improved as a result of the elimination of the fluctuation in the 2nd
transfer section. This is due to the change in the drive position of the transfer belt.
• A single IH coil and a heat pipe roller are adopted.
• Adopting the new toner fusing at low temperature expands the color reproduction range and
improves the gloss of the toner.
• The life of the developer material is lengthened and the service cost for the replacement is
reduced due to the new self-refreshing development system.
• Replacing toner cartridges and supplying paper to the tandem LCF can be performed while
the equipment is being operated.
• The SVGA large color LCD (10.4 inches) is adopted for the touch panel.
• A maximum of 256 g/m
2
(94.5 lb. Cover) thick paper for the drawers, LCF and tandem LCF,
and 300 g/m
2
(165.7 lb. Index) for the bypass tray can be accepted.
• Special paper, such as long size (length: 484 - 1200mm), waterproof and tab paper is
available.
1.2 Main Feature of e-STUDIO5560C/6560C/6570C
• The energy saving feature is included. Complies with Energy Star V2.0
• High security performance is included. (IEEE2600.1 supported / ISO15408 EAL3+ certified)
• A security HDD (320 GB) is embedded as a standard.
To Next Page
Loading...
