Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Fine Line Enhancement Switchover; “Pureblack;Puregray” Threshold Adjustment (PS)

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
SETTING ADJUSTMENT
6 - 60
6.3.7 Fine line enhancement switchover
The setting of the thin line enhancement is changed.
<Adjustment Mode (05)>
<Procedure>
The procedure is the same as that of  P. 6-52"6.3.2 Gamma balance adjustment (Black Mode)".
6.3.8 “PureBlack/PureGray” threshold adjustment (PS)
<Adjustment Mode (05)>
<Procedure>
The procedure is the same as that of  P. 6-52"6.3.2 Gamma balance adjustment (Black Mode)".
Black mode Color mode
Remarks
PS PCL XPS PS PCL
e-Bridge 7322-0 7322-1 7322-2 8102-0 8102-1 8102-2 Whether fine lines are
enhanced or not can be
switched.
0: OFF
1: ON
Acceptable values: 0 to 1
(Default: 1)
EFI 7323-0 7323-1 --- 8103-0 8103-1 ---
Original mode
Item to be
adjusted
Remarks
General
Photogra
phic
Presentat
ion
Line art
Color
profile
8252-0 8252-1 8252-2 8252-3 8252-4 Text The larger the value is, the wider
the color range to be printed only
with the black toner becomes. The
smaller the value is, the narrower
this color range becomes.
Acceptable values: 1 to 255
8253-0 8253-1 8253-2 8253-3 8253-4 Graphics
8254-0 8254-1 8254-2 8254-3 8254-4 Image