Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Bridge Unit Transport Roller-1

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 220
4.10.17 Bridge unit transport roller-1
(1) Take off the bridge unit.
 P. 4-213"4.10.11 Bridge unit"
(2) Take off the bridge unit front cover.
 P. 4-214"4.10.12 Bridge unit front cover"
(3) Take off the bridge unit upper cover.
 P. 4-219"4.10.16 Bridge unit upper cover"
(4) Remove 3 screws and take off the duct.
Fig. 4-638
(5) Remove 2 screws and take off the roller
bracket.
Fig. 4-639
(6) Take off the belt from the bridge unit
transport entrance motor.
Fig. 4-640
Duct
Bracket