4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 221
(7) Remove 4 screws and then take off the
transport guide-1 unit.
(8) Remove 1 screw and then take off transport
guide-1 [1] by sliding it toward you.
Fig. 4-641
(9) Remove the E-ring on the rear side and then
remove the gear and the clip.
Fig. 4-642
(10) Remove 2 E-rings and then remove the
bearing. Then take off bridge unit transport
roller-1.
Fig. 4-643
Bridge unit transport roller-1
Bearing
Bearing
To Next Page
Loading...
