e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 214
4.10.12 Bridge unit front cover
(3) Take out the bridge unit.
Notes:
When installing the bridge unit, engage the
dent of the unit with the 4 bosses of the rail.
Fig. 4-620
(1) Open the front cover and then pull out the
bridge unit.
(2) Open the bridge unit lower cover and then
remove 3 screws from the bridge unit front
cover.
Fig. 4-621
(3) Open the bridge unit upper cover and then
take off the bridge unit front cover while
keeping the lever of the bridge unit lowered.
Fig. 4-622
Bridge unit upper cover
Bridge unit front cover
To Next Page
Loading...
