5
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SELF-DIAGNOSTIC MODE
5 - 37
• PM support mode
Fig.5-25
The number of pages currently output (OUTPUT PAGES/DEVELOP COUNTS), the recommended
number of output pages for PM (PM OUTPUT PAGES/DEVELOP COUNTS), the current drive count
(DRIVE COUNTS) and the recommended drive count for PM (PM DRIVE COUNTS) are output
together with PM units. Use this list for confirming the PM units to be replaced at each PM. See the
following page for PM:
P. 7-1"7. PREVENTIVE MAINTENANCE (PM)"
PM SUPPORT CODE LIST
20xx-xx-xx xx:xx
UNIT OUTPUT PAGES/ PM OUTPUT PAGE/ DRIVE COUNTS PM DRIVE COUNTS
DEVELOP COUNTS DEVELOP COUNTS
DRUM (K)
2516 70000 11735 170000
DRUM BLADE (K)
2516 70000 11735 170000
GRID (K)
2516 70000 11735 170000
MAIN CHARGER NEEDLE (K)
2516 70000 11735 170000
CHARGER CLEANING PAD (K)
2516 70000 11735 170000
DRUM (Y)
411 70000 8625 170000
DRUM BLADE (Y)
411 70000 8625 170000
GRID (Y)
411 70000 8625 170000
MAIN CHARGER NEEDLE (Y)
411 70000 8625 170000
CHARGER CLEANING PAD (Y)
411 70000 8625 170000
DRUM (M)
411 70000 8625 170000
DRUM BLADE (M)
411 70000 8625 170000
GRID (M)
411 70000 8625 170000
MAIN CHARGER NEEDLE (M)
411 70000 8625 170000
CHARGER CLEANING PAD (M)
411 70000 8625 170000
S/N: xxxxxxxxx
TOSHIBA e-STUDIOxxx
TOTAL: 9999999
DF TOTAL: 9999999