To Next Page

To Previous Page

SELF-DIAGNOSTIC MODE

5 - 27

5.11.3 Functions

[A] Check of the File System (Check F/S)

In case that particular service calls occur or there is a possibility of damage to the file system, the status

of each partition in the HDD can be checked.

Fig.5-15

Explanation for each item

• 1: Checks all partitions.

• 2: Checks root partition only.

• 3-8: Checks each partition shown above.

Note:

More than one partition can be selected. (“>” is displayed on the left of the selected number.)

• If damage is discovered, recover or initialize the file system (HDD).

[B] Recovery of the File System (Recovery F/S)

In case that an error occurs during the file system check, each partition can be recovered.

Fig.5-16

Explanation for each item

• 1: Recovers all partitions.

• 2: Recovers root partition only.

• 3-8: Recovers each partition shown above.

File System(F/S) Recovery Mode -> Check F/S

Please Select Partition 0: Main menu

1. ALL

2. /

3. /work

4. /registration

5. /backup

6. /imagedata

7. /storage

8. /encryption

File System(F/S) Recovery Mode -> Recovery F/S