Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Paper Feed Drive Unit; 3 Rd Drawer Transport Clutch;3 Rd Drawer Feed Clutch

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 72
4.5.41 Paper feed drive unit
4.5.42 3rd drawer transport clutch (CLT4)/3rd drawer feed clutch (CLT5)
(e-STUDIO5540C/6540C/6550C)
(1) Open the PFC board case.
 P. 9-8"9.1.9 PFC board case"
(2) Disconnect 3 connectors and remove 4
screws. Then take off the paper feed drive
unit [1].
Notes:
The number of clutches in the paper feed
drive unit of the Tandem LCF model differs
from that of the 4-drawer model.
Fig. 4-209
(1) Take off the paper feed drive unit.
 P. 4-72"4.5.41 Paper feed drive unit"
(2) Remove 2 screws and take off the bracket.
Fig. 4-210
(3) Take off the 3rd drawer transport clutch and
3rd drawer feed clutch.
Fig. 4-211
[
1
]
Bracket
3rd drawer transport clutch
3rd drawer feed clutch