e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 298
4.11.48 Original reverse unit opening/closing sensor (SR14)
(3) Remove 2 screws. Disconnect 1 connector
and take off the sensor bracket.
Fig. 4-869
(4) Release 2 latches and take off the original
exit/reverse sensor.
Fig. 4-870
(1) Take off the reading end guide.
P. 4-264"4.11.11 Exit guide / Exit/reverse
guide / Reading end guide"
(2) Disconnect 1 connector. Release 2 latches
and take off the original reverse unit opening/
closing sensor.
Fig. 4-871
To Next Page
Loading...
