e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
SETTING ADJUSTMENT
6 - 56
Twin color print (600 dpi)
Notes:
• Be sure that this adjustment be made after performing P. 6-49"6.3.1 Automatic gamma
adjustment".
• Changing the adjustment setting influences the adjacent density area slightly.
E.g.: When the value of the medium density is larger, the adjacent areas in the low density and
high density range will become slightly darker.
• The adjustment item can be changed by the setting value of code 05-8066; however, the
maximum density may not appear as high even when High density / Maximum density is set to
high if “1” is set for “05-8066”.
<Procedure>
The procedure is the same as that of P. 6-52"6.3.2 Gamma balance adjustment (Black Mode)".
<Range of the density area (low density, medium density, high density, highest density)>
Color
PS PCL
XPS
Item to be
adjusted
Remarks
smoot
h
Detail
smoot
h
Detail
smoot
h
Detail
When
"0" is
set for
"05-
8066"
When
"1" is
set for
"05-
8066"
Yellow 8026-0 8030-0 8034-0 8038-0 8150-0 8154-0 Low
density
Low
density
The larger the
value is, the
darker the color
to be adjusted
becomes.
Acceptable
values: 0 to 255
(Default: 128)
8026-1 8030-1 8034-1 8038-1 8150-1 8154-1 Medium
density
Medium
density
8026-2 8030-2 8034-2 8038-2 8150-2 8154-2 High
density
High
density/
Highest
density
Magenta 8027-0 8031-0 8035-0 8039-0 8151-0 8155-0 Low
density
Low
density
8027-1 8031-1 8035-1 8039-1 8151-1 8155-1 Medium
density
Medium
density
8027-2 8031-2 8035-2 8039-2 8151-2 8155-2 High
density
High
density/
Highest
density
Cyan 8028-0 8032-0 8036-0 8040-0 8152-0 8156-0 Low
density
Low
density
8028-1 8032-1 8036-1 8040-1 8152-1 8156-1 Medium
density
Medium
density
8028-2 8032-2 8036-2 8040-2 8152-2 8156-2 High
density
High
density/
Highest
density
Black 8029-0 8033-0 8037-0 8041-0 8153-0 8157-0 Low
density
Low
density
8029-1 8033-1 8037-1 8041-1 8153-1 8157-1 Medium
density
Medium
density
8029-2 8033-2 8037-2 8041-2 8153-2 8157-2 High
density
High
density/
Highest
density