Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Paper Feeding System Related Service Call

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 112
8.3.13 Paper feeding system related service call
[C130] 1st drawer tray abnormality
[C140] 2nd drawer tray abnormality
[C150] 3rd drawer tray abnormality
[C160] 4th drawer tray abnormality
Classification Error item
Paper feeding system related service
call
The tray-up motor is not rotating or the 1st drawer tray is not
moving normally. (the case that paper can be fed from any
drawer except the 1st drawer).(C130)
The tray-up motor is not rotating or the 2nd drawer tray is not
moving normally. (the case that paper can be fed from any
drawer except the 2nd drawer).(C140)
Check item Measures
Coupling Check that no paper scraps remain in the coupling section.
Tray-up motor • Motor check
(Perform the output check: 03-246/247)
• Connector check
• Harness check
Tray-up sensor • Sensor check
(Perform the input check: 03-[COPY]ON/[9]/[H], /[9]/[G])
• Connector check
• Harness check
PFC board • Connector check (CN508, CN513)
• Board check
Replace parts Remarks
Tray-up motor
Tray-up sensor
PFC board
Classification Error item
Paper feeding system related service
call
The 3rd drawer tray-up motor is not rotating or the 3rd drawer
tray is not moving normally. (the case that paper can be fed
from any drawer except the 3rd drawer).(C150)
The 4th drawer tray-up motor is not rotating or the 4th drawer
tray is not moving normally. (the case that paper can be fed
from any drawer except the 4th drawer).(C160)
Check item Measures
Coupling Check that no paper scraps remain in the coupling section.
Tray-up motor • Motor check
(Perform the output check: 03-248/249)
• Connector check
• Harness check
Tray-up sensor • Sensor check
(Perform the input check: 03-[COPY]ON/[9]/[F], /[9]/[E])
• Connector check
• Harness check