e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
REMOTE SERVICE
10 - 22
(10) Press the [ON] button to notify or the [OFF] button not to notify each item for E-mail and FAX.
When Total Count Transmit is set to ON, the screen to set the notification date is displayed.
Then set the notification date with the following procedure.
Fig.10-24
Set the date and time of the Total Counter.
The following 3 items can be specified for the date setting, and more than one day of the week
also can be selected.
• Day of the week (More than one day can be selected.)
• Notify Date 1
• Notify Date 2
You can send the Total Counter immediately without the above settings by pressing the [SEND
NOW] button.
• Day of the week ([SUN] to [SAT] buttons)
Pressing the buttons ([SUN] to [SAT]) of the desired day makes transmission on every
specified day. More than one day can be selected.
* This does not affect the settings of “Notify Date 1” and “Notify Date 2”.
• Notify Date 1 and Notify Date 2 ([DATE] button)
Pressing the [DATE] button sets up to 2 dates on which you wand to send data.
* This is not affected by the specified day of the week.
To Next Page
Loading...
