e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
11 - 10
[C] Patch update
e-STUDIO5540C/6540C/6550C
Fig.11-7
e-STUDIO5560C/6560C/6570C
Fig.11-8
Notes:
• Since the date and time set in the equipment are recorded in the firmware update log, make
sure that they are correct before updating the firmware.
• Never change the model specific folder name since it is used for identifying the data file when
the ones used for updating multiple models are stored in a USB device.
• Updating of the base version data must be completed in advance when an update of
differential items is performed.
• If the differential items update has failed, update the base version data and then perform the
differential items update again.
• Be sure to perform a standard update if such is required after the board or HDD has been
formatted. The update will fail if the differential items update is performed instead.
• The files for the standard package and the differential items package can be used to update
while they are stored into the same USB device. Moreover, it is also possible to store multiple
files for differential items package into the same USB device.
Model specific folder name 5540C_6550C
Model specific folder name 5560C_6570C
USB media
5540C_6550C
T130HDPWxxxx.tar
T130SFPWxxxx.tar
signartures.sig
USB media
5560C_6570C
T340HDPWxxxx.tar
T340SFPWxxxx.tar
signartures.sig
To Next Page
Loading...
