Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Page 1249

11
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
FIRMWARE UPDATING
11 - 51
11.5 Confirmation of the updated data
After the updating is completed, check each data version in Setting Mode (08) to confirm that the data
were overwritten properly.
* If “NGD” is displayed for the PFC ROM version (08-9940), the downloading of PFC ROM fails.
Update the firmware again.
 P. 11-52"11.6 When Firmware Updating Fails"
Firmware Code Remarks
Updating Master data
(HDD program data)
08-8952 HD data external version
08-9900 System software version
Updating System ROM
(OS data)
08-9930 System ROM version
Updating PFC ROM
(PFC firmware)
08-9940 PFC ROM version
Updating Engine ROM
(Engine firmware)
08-9901 Engine ROM version
Updating Scanner ROM
(Scanner firmware)
08-9902 Scanner ROM version
Updating RADF ROM
(RADF firmware)
08-9903 RADF ROM version
Updating Finisher ROM 08-9904 Finisher ROM version
Saddle stitcher ROM version
08-9944 Hole punch unit ROM version
08-9945 Converter ROM version
Updating FAX ROM 08-9905 FAX ROM version