Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Page 130

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 82
3.12.2 Composition
Process unit (Y, M, C, K) Drum cleaner unit Drum PM parts
Cleaning blade PM parts
Recovery blade
Blade side seal
Toner recovery auger
Main charger unit Main charger grid PM parts
Needle electrode PM parts
Needle electrode cleaner PM parts
Discharge LED ERS-Y, -M, -C, -K
V0 sensor unit Drum surface potential (V0)
sensor
(e-STUDIO6550C/6570C only)
S34
V0 sensor shutter solenoid -K
(e-STUDIO6550C/6570C only)
SOL4
Drum thermistor-Y, -K THM1, THM2
Needle electrode cleaner motor-
K/-C/-M/-Y
M23, M24, M25, M26
Needle electrode cleaner
detection sensor-K/-C/-M/-Y
S30, S31, S32, S33
Main charger ozone exhaust fan-
K/-C/-M/-Y
F17, F18, F19, F20
Auger lock detection sensor S42
Developer unit Developer material
Auto-toner sensor S26, S27, S28, S29
Developer sleeve (Magnetic
roller)
Doctor blade
Mixer
Drive section, other Temperature/Humidity sensor S12
Ozone filter-1, -2 PM parts
Ozone suctioning fan F24
High-voltage transformer HVT1, HVT2
Developer unit motor-K/-YMC M29, M31
Developer unit mixer motor-K/-YMC M30, M32
Drum motor-K/-YMC M27, M28
Toner filter PM parts
Scattered toner suctioning fan F25
EPU cooling fan F14