Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Page 173

3
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
OUTLINE OF THE MACHINE
3 - 125
+24VD2 LGC board Sub-hopper toner motor-K M19 F202:
8 A (Semi time-lag)
Sub-hopper toner motor-C M20
Sub-hopper toner motor-M M21
Sub-hopper toner motor-Y M22
Needle electrode cleaner motor-K M23
Needle electrode cleaner motor-C M24
Needle electrode cleaner motor-M M25
Needle electrode cleaner motor-Y M26
Waste toner transport motor M33
Polygonal motor M34
Mirror motor-M M35
Mirror motor-C M36
Mirror motor-K M37
Shutter motor M38
Auto-toner sensor-K S26
Auto-toner sensor-C S27
Auto-toner sensor-M S28
Auto-toner sensor-Y S29
Drum surface potential (V0) sensor-K
(e-STUDIO6550C/6570C only)
S34
Image quality shutter solenoid SOL3
V0 sensor shutter solenoid-K
(e-STUDIO6550C/6570C only)
SOL4
IH board cooling fan-1 F8
IH board cooling fan-2 F9
EPU cooling fan F14
Toner cartridge heat insulation fan F21
Laser optical unit cooling fan (Front) F22
Laser optical unit cooling fan (Rear) F23
Ozone suctioning fan F24
Scattered toner suctioning fan F25
Toner cooling exhaust fan F31
Lower exit section cooling fan-3 F36
High-voltage transformer-1 HVT1
High-voltage transformer-2 HVT2
PFC board Tray-up motor-1 M44
3rd drawer transport clutch CLT4
3rd drawer feed clutch CLT5
4th drawer transport clutch CLT6
4th drawer feed clutch CLT7
Bridge unit cooling fan (rear) F7
Exit paper cooling fan (rear) F15
Upper exhaust fan (left) F29
Upper exhaust fan (right) F30
Tandem LCF solenoid SOL9
Stopper opening/closing solenoid
(front)
SOL10
Stopper opening/closing solenoid
(rear)
SOL11
Voltage Board/Unit Part Fuse type