4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 113
Notes:
1. Never turn the 2 couplings behind the
developer unit in a direction opposite to
the one shown with the arrow.
2. Be sure not to lose the scraper in the
developer. Make sure that the scraper is
installed passing through the hole, and
check if the coupling can be turned in the
direction of the arrow in the figure.
3. Be sure that there is no developer
material adhering to the driving gear in
the developer unit.
Fig. 4-331
Fig. 4-332
Fig. 4-333
Coupling (for Mixer)
Coupling
(for Developer sleeve)
To Next Page
Loading...
