Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Page 324

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 150
(3) Take off 1 E-ring and 1 bearing [1].
Fig. 4-438
(4) Remove 1 E-ring and 1 bearing.
Fig. 4-439
(5) Take off the cleanable facing roller assembly
[1].
Fig. 4-440
(6) Remove 2 E-rings, 1 gear [3], 1 pin [4] and 4
bearings [2] from the cleanable facing roller
[1].
Fig. 4-441
[
1
]
E-ring
Bearing
[
1
]
[
1
]
[
2
]
[
3
]
[
4
]
[
2
]
[
2
]