Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Page 365

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 191
(5) Release the harness from the harness guide,
remove 2 screws and take off harness guide-
2 [1].
Notes:
When installing, do not let the harness be
caught.
Fig. 4-552
(6) Disconnect a connector of the fuser belt
edge thermistor.
(7) Release a harness from 7 clamps.
Fig. 4-553
(8) Remove 1 screw, release the harness from
the harness clamp and take off the fuser belt
edge thermistor.
Fig. 4-554
[
1
]
Clamp
Clamp
Fuser belt edge thermistor