e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 198
(5) Remove 2 screws and take off the harness of
the IH coil.
Fig. 4-573
(6) Remove 2 screws and take off the IH coil [1].
Notes:
• Be sure to put the IH coil with the tip of its
positioning metal plate up to prevent it
from deforming.
• When installing the IH coil in the
equipment, be careful not to deform its
positioning metal plate.
Fig. 4-574
Fig. 4-575
To Next Page
Loading...
