4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 273
(4) Remove 1 E-ring and 1 bushing.
Fig. 4-796
(5) Remove 4 screws and take off the platen
guide.
Fig. 4-797
(6) Take off the reading start roller.
Notes:
When installing the reading start roller, refix
the loosened screw and tighten the belt
tension.
Fig. 4-798
To Next Page
Loading...
