e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 296
4.11.46 Original tray width sensor (SR2)
(3) Remove 2 screws and take off the sensor
bracket.
Fig. 4-863
(4) Disconnect 1 connector. Release 2 latches
and take off the original tray sensor.
Fig. 4-864
(1) Take off the original reverse tray.
P. 4-261"4.11.7 Original reverse tray"
(2) Remove 2 screws and release 8 latches to
take off the original side guide unit.
Fig. 4-865
To Next Page
Loading...
