e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
SETTING ADJUSTMENT
6 - 50
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON. Adjustment Mode
(2) Select the A4/LT drawer. Key in the pattern number and press the [FAX] button to output a “Patch
chart for gamma adjustment”
Notes:
However, this is applied to all paper types when 05-8008 (600dpi) or 05-8009 (1200dpi) is
performed.
(3) Place the patch chart for adjustment printed in step (2) face down on the original glass, with its
side, on which two black squares are present, aligned against the original scale.
(4) Key in a code and press the [START] button. The scanner reads the chart automatically and
performs automatic gamma adjustment calculation.
* If the code 8008 (600dpi) or 8009 (1200dpi) is performed, the adjustment will be applied to all paper
types.
Pattern No. Paper type Remarks
70 Plain paper 1 Used when the code 8004-0 is performed (600dpi)
72 Plain paper 2 Used when the code 8004-1 is performed (600dpi)
74 Recycled paper Used when the code 8004-2 is performed (600dpi)
76 Thick paper 1 Used when the code 8004-3 is performed (600dpi)
78 Thick paper 2 Used when the code 8004-4 is performed (600dpi)
80 Thick paper 3 Used when the code 8004-5 is performed (600dpi)
82 Thick paper 4 Used when the code 8004-6 is performed (600dpi)
84 Special paper 1 Used when the code 8004-7 is performed (600dpi)
86 Special paper 2 Used when the code 8004-8 is performed (600dpi)
230 Plain paper 1 Used when the code 8005-0 is performed (1200dpi)
232 Plain paper 2 Used when the code 8005-1 is performed (1200dpi)
234 Recycled paper Used when the code 8005-2 is performed (1200dpi)
236 Thick paper 1 Used when the code 8005-3 is performed (1200dpi)
238 Thick paper 2 Used when the code 8005-4 is performed (1200dpi)
240 Thick paper 3 Used when the code 8005-5 is performed (1200dpi)
242 Thick paper 4 Used when the code 8005-6 is performed (1200dpi)
244 Special paper 1 Used when the code 8005-7 is performed (1200dpi)
246 Special paper 2 Used when the code 8005-8 is performed (1200dpi)
Code
(600dpi)
Code
(1200dpi)
Paper type Remarks
8004-0 8005-0 Plain paper 1 When the reproduction of gradation is not
appropriate, the gradation reproducibility
of all colors Y, M, C and K can be
corrected by performing this automatic
gamma adjustment.
8004-1 8005-1 Plain paper 2
8004-2 8005-2 Recycled paper
8004-3 8005-3 Thick paper 1
8004-4 8005-4 Thick paper 2
8004-5 8005-5 Thick paper 3
8004-6 8005-6 Thick paper 4
8004-7 8005-7 Special paper 1
8004-8 8005-8 Special paper 2
8008 8009 All type paper
*
To Next Page
Loading...
