Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Page 612

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
SETTING ADJUSTMENT
6 - 64
6.3.14 Sharpness adjustment
This adjustment is applied when images need to be softer or sharper.
The adjustment is available for each original mode.
The performance of this adjustment differs depending on the setting value of 05-7322, 05-7323, 05-
8102 or 05-8103 with “6.3.7Fine line enhancement switchover” as shown below.
<Adjustment Mode (05)>
Item to be
adjusted
When
“1” is
set for
“05-
7322”
When “1” is set for “05-8102”
When “1”
is set for
05-7323 or
05-8103
Remarks
Black Color
Color/
Black
e-Bridge e-Bridge EFI
- General Photo
Present
ation
Line art
Red
Seal
Color
-
Image 8118-2 8110-2 8111-2 8112-2 8113-2 8109-2 8119-2 The larger the value
is, the sharper the
image becomes.
The smaller the
value is, the softer
the image
becomes.
Acceptable values:
0 to 255 (Default:
128)
It is possible to
input the codes with
“NA”, though their
effect does not
appear on the
images.
Small and
thin line
text
8118-1 8110-1 8111-
1(NA)
8112-
1(NA)
8113-1 8109-1 8119-1
Others 8118-0
(NA)
8110-
0(NA)
8111-
0(NA)
8112-
0(NA)
8113-
0(NA)
8109-
0(NA)
8119-0(NA)
Item to be
adjusted
When
“0” is
set for
“05-
7322”
When “0” is set for “05-8102”
When “0”
is set for
05-7323 or
05-8103
Remarks
Black Color
Color/
Black
e-Bridge e-Bridge EFI
- General Photo
Present
ation
Line art
Red
Seal
Color
-
Image 8118-2 8110-2 8111-2 8112-2 8113-2 8109-2 8119-2 The larger the value
is, the sharper the
image becomes.
The smaller the
value is, the softer
the image
becomes.
Acceptable values:
0 to 255 (Default:
128)
It is possible to
input the codes with
“NA”, though their
effect does not
appear on the
images.
Graphics 8118-1 8110-1 8111-
1(NA)
8112-
1(NA)
8113-1 8109-1 8119-1
Text 8118-0
(NA)
8110-
0(NA)
8111-
0(NA)
8112-
0(NA)
8113-
0(NA)
8109-
0(NA)
8119-0(NA)