e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
SETTING ADJUSTMENT
6 - 118
Notes:
Open the original jam access cover and
check the height adjustment pointer on the
front and rear side. When taking off /
reinstalling the RADF, be sure to check the
position of the height adjustment pointer
before taking off the RADF. Check the
position of the pointer again after the RADF
is reinstalled. Perform the RADF height
adjustment only when the position is not
aligned with that before the reinstallation.
Fig.6-102
To Next Page
Loading...
