NEC Univerge SV8100 - Group (Shared) Mailbox

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 153
27
Caller ID Refuse Setup
0 = Disable (No)
1=Enable (Yes)
0
28
Effectivity of
“Conversation Recording
Destination for Extension”
0 = No Effect (No)
1 = Available (Yes)
1 15-12
30
Flexible Ringing by Caller
ID
0 = Disable (No)
1=Enable (Yes)
1 13-04
32
Anti-trombone Function
0 = No Effect (No)
1 = Available (Yes)
0
33
APSU(VM00) Trunk
Receive Gain
Additional PAD when a trunk
call connects to APSU Voice
Mail.
1~63
(-15.5dB ~ +15.5dB
in 0.5dB intervals)
32 (0dB)
35
DT700 Large LED
Illumination Setup
Sets LED color for incoming
trunk call. InDT700 local
terminal setting menu,
Illumination setting must be
‘Automatic’, otherwise the
terminal will ignore PRG 14-
01-35, PRG 15-05-37 and
PRG 15-23 settings.
2 = Red
3 = Green
4 = Blue
5 = Yellow
6 = Purple
7 = Light Blue
8 = White
9 = Rotation
2
38
Outgoing CLI Selection
Select CLI (Calling Party
Number) sending way to
trunk. When set to 0,
extension CLI number set in
PRG21-13-01, PRG21-18-
01, or PRG21-19-01is sent
according to seized trunk
type (ISDN/H.323/SIP)
automatically.
When set to 1, calling
extension number is sent as
CLI.
When set to 2, extension
table number set in PRG21-
25-01 is sent as CLI.
When set to 3, 4, or 5,
extension CLI number set in
PRG21-13-01, PRG21-18-
01, or PRG21-19-01is sent to
seized trunk regardless of
trunk type.
0 = Contract Number
1 = Extension
Number
2 = Extended Table
3 = PRG 21-13
4 = PRG 21-18
5 = PRG 21-19
6 = No digits
0 21-13-01
21-18-01
21-19-01
21-25-01
Item
No.
Item Input Data Default
Related
Program