Issue 10.1 UNIVERGE SV8100
2 - 180 Program 15 : Extension, Basic Setup
23
Speed Dial Preview Mode
This option defines how a speed
dial key functions when pressed. If
set to Preview (0), the speed dial
number can be previewed before
dialing. If set to Outgoing
Immediate (1), the number is dialed
immediately.
0=Preview
1 = Outgoing Immediately
0
24
Conference Key Mode
This option allows an extension
Conf key to be programmed for
Conference or for Transfer. When
set for Transfer (1), the user places
a call on hold, dials the extension
to which it should be transferred,
then presses the Conf key. The call
is then transferred. When set for
Conference (0), with an active call,
the user presses the Conf key,
places a second call, then presses
the Conf key twice. All the calls are
then connected.
0 = Conference
1 = Transfer
0
26
MSG Key Operation Mode
Determine whether an extension
MSG key should function as a
Message key or Voice Mail key. If
set as a Message key, users can
press the key to call the voice mail
only when they have new
messages.
0 = Message Key
1=Voice Mail Key
0 (OT)
1 (AU)
27
Handset Volume
Determine how an extension
handset volume is set after it is
adjusted during a call.
When 1 is assigned in this
program and a user sets the
volume to maximum, the volume
is reset to a level to meet FCC
standards when the user hangs
up.
0 = Back to Default (Back)
1 = Stay at previous level
(Stay)
1
28
Message Waiting Lamp Color
Determine whether an extension
Message Waiting Lamp lights
Green (0) or Red (1) when a
message is received.
0=Green
1=Red
0 15-02-35
15-02-36
15-02-37
15-02-38
29
PB Back Tone Level
This program allows adjustment of
the PB Back Tone Level when you
are calling an ISDN Line.
1~63 (-15.5dB ~ +15.5dB)
32
(0dB)
Item
No.
Item Input Data Default
Related
Program
To Next Page
Loading...
