NEC Univerge SV8100 - Page 278

Issue 10.1 UNIVERGE SV8100
2 - 242 Program 20 : System Option Setup
Conditions
None
Feature Cross Reference
 None
26
F-Route Outgoing
Mode From Incoming
Call History
Enable or Disable the
ability to route Calls in
the Call History via F-
Route if the leading
digit(s) are set to F-
Route.
If set to 0 (Off), all
Calls are routed via
Normal Trunk Routing.
If Set to 1 (On), if the
leading digit(s) are set
to F-Route in PRG 11-
01 or 11-20 the call will
follow that F-Route
Programming.
0 = Off
1 = On
0 11-01
11-20
27
ACD Monitor for
Business Mode
Select whether or not
Call Monitor provided
in ACD Mode works in
normal business
mode.
0 = Off
1 = On
0
Input Data (Continued)
Item
No.
Item Input Data Default
Related
Program