NEC Univerge SV8100 - Page 298

Issue 10.1 UNIVERGE SV8100
2 - 262 Program 20 : System Option Setup
09
Privacy Release
Turns off or on an extension user ability to
initiate a Voice Call Conference.
0 = Off
1 = On
1
10
Barge-In Monitor
Enables the extension Barge-In Mode to be
Speech mode (0) or Monitor mode (1).
0 = Speech
1 = Monitor
0 20-13-45
11
Room Monitor, Initiating Extension
Turns off or on an extension user ability to
Room Monitor other extensions.
0 = Off
1 = On
0
12
Room Monitor, Extension Being Monitored
Turn off or on an extension ability to be
monitored by other extensions.
0 = Off
1 = On
0
13
Continued Dialing (DTMF) Signal on ICM
Call
Turn off or on an extension user ability to use
Continued Dialing, which allows DTMF signal
sending while talking on extension.
0 = Off
1 = On
1
14
Department Calling (PLT No Called
Extension)
Turns off or on an extension user ability to call
a Department Group Pilot.
0 = Off
1 = On
1
15
Barge-In, Initiate
Turns off or on an extension user ability to
barge-in on other's calls.
0 = Off
1 = On
1 (OT)
0 (AU)
16
Barge-In, Receive
Turns off or on an extension ability to have
other extensions barge-in on calls.
0 = Off
1 = On
1 (OT)
0 (AU)
17
Barge-in Tone/Display (Intrusion Tone)
Turns off or on the Barge-In tone. If on, callers
hear an alert tone and their display indicates
the Barge-In when another extension barges
into their conversation. If off, there is no alert
tone or display indication.
0 = Off
1 = On
1
18
Programmable Function Key Programming
(General Level)
Turns off or on an extension user ability to
program General function keys using Service
Code 851 (by default). (Refer to Program 20-
07-10 for Service Code 852.)
0 = Off
1 = On
1
19
Selectable Display Messaging (Text
Messaging)
Turns off or on an extension user ability to use
Selectable Display Messaging.
0 = Off
1 = On
1
Item
No.
Item Input Data
Default
Related PRG
COS 01~15