NEC Univerge SV8100 - Page 299

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 263
20
Account Code/Toll Restriction Operator
Alert (Restricted Operation Transfer)
Turns off or on operator alert when an
extension user improperly enters an Account
Code or violates Toll Restriction.
0 = Off
1 = On
1(OT)
0 (AU)
21
Extension Name
Turns off or on an extension user ability to
program its name.
0 = Off
1 = On
1
22
Busy Status Display (Called Party Status)
Turns off or on the ability to display the
detailed state of the called party.
0 = Off
1 = On
0 20-13-06
23
Display the Reason for Transfer
Select whether an extension should display
the reason a call is being transferred to their
extension (Call Forward Busy, Call Forward
No Answer, DND).
0 = Off
1 = On
0
24
Privacy Release by Pressing Line Key
Turns off or on a user ability to press a line key
to barge into an outside call. The Barge-In
feature must be enabled if this option is to be
used.
0 = Off
1 = On
0
26
Group Listen
Turns off or on an extension user ability to use
Group Listen.
0 = Off
1 = On
0 (OT)
1 (AU)
27
Busy on Seizing Virtual Extension
If set to 1, you can call a busy extension which
is talking on a virtual extension key. Program
20-13-06 (Call Waiting) must be set to 0 for
this option to work.
0 = Off
1 = On
1
28
Allow Class of Service to be Changed
Turns off or on the ability of an extension
Class of Service to be changed via Service
Code 777 (OT) / 677 (AU).
0 = Off
1 = On
0
29
Paging Display
Turns off or on an extension user ability to
display paging information.
0 = Off
1 = On
1
30
Background Music
Allow or Deny an extension user to turn
Background Music on and off.
0 = Deny
1 = Allow
1
31
Connected Line Identification (COLP)
0 = Off
1 = On
0
Item
No.
Item Input Data
Default
Related PRG
COS 01~15