NEC Univerge SV8100 - Page 300

Issue 10.1 UNIVERGE SV8100
2 - 264 Program 20 : System Option Setup
32
Deny Multiple Barge-Ins
Allows or Denies an extension from having
multiple users Barge into their conversation.
0 = Off
1 = On
0
33
ACD Supervisor’s Position Enhancement
This option must be set 1 for the operator to
use service codes in Program 11-13-10 ~ 11-
13-13.
0 = Off
1 = On
0
11-13-10
11-13-11
11-13-12
11-13-13
34
Block Manual Off-Hook Signaling
Turns off or on an extension user ability to
block off-hook signals manually sent from a
co-worker.
0 = Off
1 = On
0
35
Block Camp On
Turns off or on an extension user ability to
block callers from dialing to Camp On.
0 = Off
1 = On
0
36
Call Duration Timer Display
Turns off or on an extension display of the Call
Duration Time. The system waits until the
interdigit time (Program 21-01-01) expires
before beginning this timer.
0 = Off
1 = On
1
38
Headset Ringing for SLT
Turn off or on an extension user ability to use
the Headset ringing.
0 = Off
1 = On
0
39
ACD Queue Status Display
Turns off or on the ACD Queue Status Display
for an extension Class of Service. Any
extension which has this option enabled also
hears the queue alarm.
0 = Off
1 = On
0 41-20
40
Do Not Disturb
Turn off or on an extension user ability to set
or cancel Do Not Disturb.
0 = Off
1 = On
1
11-11-08
15-07-03
41
Voice Mail Message Indication on DSS
Turn off or on the Voice Mail Message
Indication for an extension on a DSS console.
0 = Off
1 = On
0
42
Extension Data Swap Enabling
Turn off or on an extension user ability to use
Extension Data Swap.
0 = Off
1 = On
1 11-15-12
44
Live Monitor Enabling
Turn off or on an extension user ability to use
Live Monitor.
0 = Off
1 = On
1
Item
No.
Item Input Data
Default
Related PRG
COS 01~15