NEC Univerge SV8100 - System Re-initialization

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 317
07
Permit Code Table
1~4 = Table
0 = Disable
(None)
1-6, 8-15 = 0
(OT)
7 = 1 (OT)
3 = 1 (AU)
4 = 2 (AU)
5 = 3 (AU)
7 = 0 (AU)
Set the tables 1~4 when
referring to the table set up
by 21-06-06.
21-06-06
08
Restriction Table
1~4 = Table
0 = Disable
(None)
1, 2, 6~15 =
0 (OT)
3 = 1 (OT)
4 = 2 (OT)
5 = 3 (OT)
1 -15 = 0
(AU)
Set the tables 1~4 when
referring to the table set up
by 21-06-07.
21-06-07
09
Restriction for
Common Speed
Dials
0 = Does Not
Restrict
1 = Following
Restriction
Check
0
Use this option to enable/
disable Toll Restriction for
Common Speed Dialing
numbers. If enabled, System
Speed Dialing numbers
have the same restrictions
as manually dialed numbers.
10
Restriction for
Group Speed Dials
0 = Does Not
Restrict
1 = Following
Restriction
Check
0
Use this option to enable/
disable Toll Restriction for
Group Speed Dialing
numbers. If enabled, Group
Speed Dialing numbers
have the same restrictions
as manually dialed numbers.
11
Intercom Call
Restriction
0 = Disable
(No)
1 = Enable
(Yes)
0
Determines if incoming and
outgoing intercom calls are
allowed.
Item
No.
Item Input Data Default Description
Related
PRG