Ruckus Wireless Virtual SmartZone - Page 135

1. Go to Configuration > AP Zones.
2. On the sidebar, click AP Registration Rules.
The AP Registration Rules page appears.
3. Click Create New.
The AP Registration Rule form appears.
4. In Rule Description, type a name that you want to assign to this rule.
5. In Rule Type, click the basis upon which you want to create the rule. Options include:
NOTE: The format of the IP address or addresses that you need to enter here depends on
the AP IP mode that you selected when you created the AP zone to which this rule will be
assigned. If you selected IPv4 Only, enter an IPv4 address. If you selected IPv6 Only, enter
an IPv6 address.
• IP Address Range: If you select this option, enter the From (starting) and To (ending) IP
address that you want to use.
• Subnet: If you select this option, enter the IP address and subnet mask pair to use for
matching.
• GPS Coordinates: If you select this option, type the GPS coordinates to use for matching.
Access points that have been assigned the same GPS coordinates will be automatically
assigned to the AP zone that you will choose in the next step.
You can choose the Rule Type as GPS coordinates, wherein you must provide information
about the latitude, longitude and distance to determine if the AP is within the defined area.
• Provision Tag: If the access points that are joining the controller have been configured
with provision tags, click the Provision Tag option, and then type a tag name in the
Provision Tag box. Access points with matching tags will be automatically assigned to
the AP zone that you will choose in the next step.
NOTE: Provision tags can be configured on a per-AP basis from the access point’s
command line interface.
6. In Zone Name, click the down arrow to display available AP zones, and then click the AP
zone to which APs that match this rule will be assigned.
7. Click Create New.
A progress bar appears as the controller saves the AP registration rule.
When the process is complete, the page refreshes, and then registration rule that you created
appears on the AP Registration Rules page.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
135
Managing Global Configuration, AP Tunnel Profiles, Templates, and AP Registration Rules
Working with Registration Rules