Data Plane Statistics
Data plane statistics describe general information about the data plane.
The default data plane statistic file name format is: dp_YYYY_MM_DD_hh_mm_ss_ms.csv
where ms stands for three-digit milliseconds. The following table lists the data plane statistical
attributes.
Table 37: Attributes in the data plane statistics file
DescriptionColumn
MAC address of the data planekey
Data plane IDbladeId
Name of the data planename
Model of the data planemodel
Serial number of the data planeserialNumber
Current firmware version of the data planefwVersion
Number of minutes elapsed since the data plane was last
rebooted
uptime
Data plane associated with the control plane's MAC addresschassisID
IP address assigned to the data planeip
Timestamp when the data plane connected to the controllercreationTime
Timestamp of the data plane's latest connectionlastSeen
Data Plane Ethernet Port Statistics
Data plane Ethernet port statistics describe traffic related information on the data plane.
The default data plane statistic file name format
is:dpEthPortStatistics_YYYY_MM_DD_hh_mm_ss_ms.csv where ms stands for three-digit
milliseconds.
The following table lists the attributes in the data plane Ethernet port statistics file
Table 38: Attributes in the data plane Ethernet port statistics file
DescriptionColumn
MAC address of the data planedBladeId
Data plane port ID (either 1 or 2)portId
Unix timestamp when these statistics were collected. These
statistics are collected at 15-minute intervals (for example,
10:00, 10:15. 10:30).
timeIntervalInMillis
The rate at which the data plane was transmitting data at
the time the controller generated this report
txRate
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
420
Statistics Files the Controller Exports to an FTP Server
AP Inventory