Ruckus Wireless Virtual SmartZone - Adding a RADIUS Server to the Controller

You have completed creating a user defined interface for the hotspot.
Figure 146: Creating a user defined interface
Adding a RADIUS Server to the Controller
A hotspot requires a RADIUS server to authenticate users that are attempting to access the
hotspot portal.
Use the form shown below to add a RADIUS server.
Figure 147: The Create New RADIUS Service form
Adding a RADIUS Accounting Server
If you want to monitor the usage of hotspot users (for example, for billing purposes), you can
also add a RADIUS accounting to the controller.
The form for adding a RADIUS accounting server is the same as for adding a RADIUS server –
you only need to click RADIUS Accounting instead of RADIUS.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
278
Creating and Managing Hotspots
Hotspot Configuration Options