DescriptionField name
Receive data rate in kilobits per second during the periodrxRateKbps
Total number of data frames transmitted during the periodtxFrames_r
BSSID of the WLANbssid
Identified the WLAN ID in the controller systemwsgWlanId
Total number of bytes received during the periodrxBytes_r
Average number of concurrently connected clients during
the period
avgNumClients
SSID of the WLANssid
Number of clients that failed to associate with the WLAN
during the period
failedAssoc
Maximum number of concurrently connected clients during
the period
maxNumClients
The radio on the AP used to provide the WLAN service.
Possible values include 0 (2.4Ghz radio) and 1 (5GHz radio).
radioId
ID of the MVNO accounttenantId
Control Plane Statistics
The control plane statistics file contains detailed general information about the control plane.
• If the control plane statistics file is exported daily:
statsCBladeSysMonDay_YYYY_MM_DD_hh_mm_ss_ms.csv
• If the control plane statistics file is exported hourly:
statsCBladeSysMonHour_YYYY_MM_DD_hh_mm_ss_ms.csv where ms stands for
three-digit milliseconds.
NOTE: The term "period" in the following table refers to the time interval (hourly or daily) selected
in Statistics Date Interval on the web interface.
The following table lists the attributes in the control plane statistics file.
Table 36: Attributes in the control plane statistics file
DescriptionColumn Name
Control plane IDkey
Traffic received (in bytes) on bond0bond0_rxBytes
Minimum transmitted throughput (in bits per second) on
eth1
eth1_txBpsMin
Number of packets transmitted on eth1eth1_txPackets
Transmitted traffic (in bytes) on eth2eth2_txBytes
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
415
Statistics Files the Controller Exports to an FTP Server
AP Inventory
To Next Page
Loading...
